FSWERKS Passenger Side Engine Mount - Duratec 2.0L / 2.3L 03-11

  • $239.95

Low Inventory

Billet / Polyurethane Engine Mounts
The Ford Focus factory engine mounts were designed as soft, flexible units, to provide a comfortable drive. The drawback was the relatively large amount of engine movement the OEM mounts allowed under torque load and on hard acceleration. Such engine movement decreases stability under high performance driving conditions and rapid gear selection.

To reduce this movement FSWERKS engineered a complete fitted replacement with specially shaped molded, 70A durometer polyurethane inserts. The mount body is machined from billet aircraft grade aluminum, being almost twice as strong than the OE cast material. Installation should take no more than 10-15 minutes. This high performance mount provides a difference in the stability of the car when accelerating and braking hard. Gear changing under hard acceleration is also enhanced.

NOTE: For street use, we recommend using only the rear engine mount. Using all mounts together will cause some vibration (due to the nature of performance polyurethane mounts) that may not be desired for a daily driver, and is more for track use (Road racing, drag racing, autocross, etc).

Torque Specifications: (59ft lbs) two nuts to engine block, (38ft lbs) two center engine mount bolts, (35ft lbs) three support bracket bolts to chassis, (6ft lbs) small bolt underneath, (Use Blue Loctite 242 on threads)
Note: Support engine/transmission during installation

Includes steel bracket for mounting.

Ford Focus Duratec 2.0L & 2.3L 2003 2004 2005 2006 2007 2008 2009 2010 2011