FSWERKS Turbocharger Kit - Ford Focus 2.0L Zetec

Turbo kit is great! Everything is very tight between the fans and motor/AC compressor so you will need to get some extra heat shielding to be on the safe side. If you have a cold air intake on your car and have removed the mounting bracket you will need to fabricate a bracket to hold the charge pipe behind the battery box. Very responsive set up, not laggy at all. I will say that unfortunately it took more than two months to receive and there was a couple small issues but in the end FSWerks made it right. Thanks Guys!

I have a 13 focus se hatch with the 5 speed manual and 2.0 L and was wondering if this turbo kit will fit my car. If so will it mount like how the turbo mounts on the st models

i have a 2016 ford focus 2.0L SE, is there any way to make the turbo kit fit into my car or work around the fact i have and automatic transmission?

Hi i have an mk1 1.6l zetec engine will it fit and does the tuning work?

I am considering putting a turbo on a 1972 Lotus Elan +2S that has a 2.0 16V Zetec engine swap. There's plenty of space in the engine bay, but didn't know if you knew off hand whether this might be a possible addition to the engine. Thank you for your help.

,

does this kit come with instructions

Will this fit into st170 mk1 duratec (ALDA) engine?

Does this turbo kit utililize the stock fuel pump or is it recommended to buy an aftermarket one

Why does this not fit an automatic?

Will this fit a 2003 Ford Focus ZTS hundred year anniversary with the 2.0 zetec?

Is this a complete drop in kit, for pipe clearance and intercooler placement?

Will this fit a 2013 Ford Focus se? If not is there a kit that fits it?

Will this kit work with a 2001 ZX3 Zetec with a SVT 6 spd transmission swap? Or just the ZX3 5 spd?

Does this kit fit a 2002 svt focus? , if not do you guys have a kit that does?

Will this kit work on a 1998 Escort ZX2 with the 2.0L Zetech DOHC engine?

If I buy this kit will I need to get my own turbo manifold? I don’t see one pictured or listed

Will this fit an st170 or do I have to do anything else to make this work? Will I need to delete the variable valve timing?

This is a really great kit from FSWerks. All of the parts are made from high quality materials and everything fits where it should like a glove. Part placement is well thought out and nothing rubs on anything it shouldn't. The instructions are very clear and make installing this kit a joy. I had a blast installing this kit over the coarse of 3-4 afternoons. For tuning, follow the directions and you will be good to go. The process is pretty simple once you figure out how to use the datalogging software. Raffi worked up an awesome tune for my car. Car starts up and runs exactly like it did when it was stock. No hiccups, no fuss, it just flat out runs excellent. On the road it drives the same as stock when not in boost and is very mildly mannered. But when you get into boost, the car just pulls all the way to redline. AFR stays steady at 11.5-11.7 when in boost and power comes on nice and smooth. It really does feel like the car still has the stock tune on it, but has the necessary programming added to it for boost. The powerband from 3000-6500 rpms has gobs of midrange torque and power. If you ever wondered what it is like to drive a mk1 Focus RS, this kit will give you an idea what it is like. I have had this kit for 7 months now with NO issues. It has been reliable and powerful threw multiple WOT pulls, 80+ mile round trips, and I am 100% certain I could drive my car anywhere, for many years, and not have a single issue. Thanks again FSWerks for this great turbo kit!