FSWERKS Drivers Side Engine Mount - 2000-2011 Ford Focus SPI / Zetec / SVT / Duratec

  • $168.95
  • 2 reviews

Billet / Polyurethane Engine/Trans Mounts
The Ford Focus factory engine mounts were designed as soft, flexible units, to provide a comfortable drive. The drawback was the relatively large amount of engine movement the OEM mounts allowed under torque load and on hard acceleration. Such engine movement decreases stability under high performance driving conditions and rapid gear selection.

To reduce this movement FSWERKS engineered a complete fitted replacement with specially shaped molded, 70A durometer polyurethane inserts. The mount body is machined from billet aircraft grade aluminum, being almost twice as strong than the OE cast material. Installation should take no more than 20 minutes. This high performance mount provides a difference in the stability of the car when accelerating and braking hard. Gear changing under hard acceleration is also enhanced.

NOTE: For street use, we recommend using only the rear engine mount. Using all mounts together will cause some vibration (due to the nature of performance polyurethane mounts) that may not be desired for a daily driver, and is more for track use (Road racing, drag racing, autocross, etc).

Torque Specifications: (35ft lbs) four small nuts, (98ft lbs) large aluminum center nut, (Use Blue Loctite 242 on threads)
Note: Support engine/transmission during installation

Fitment: (Fits manual and auto trans cars)
Ford Focus SPI 2000 2001 2002 2003 2004
Ford Focus Zetec 2000 2001 2002 2003 2004
Ford Focus SVT 2002 2003 2004
Ford Focus Duratec 2.0L & 2.3L 2003 2004 2005 2006 2007 2008 2009 2010 2011

Customer Reviews
5.0 Based on 2 Reviews
5 ‚ėÖ
4 ‚ėÖ
3 ‚ėÖ
2 ‚ėÖ
1 ‚ėÖ
Customer Photos
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
FSWERKS FSWERKS Drivers Side Engine Mount - 2000-2011 Ford Focus SPI / Zetec / SVT / Duratec Review

Amazing fit and quality!

FSWERKS driver side billet poly mount was an awesome purchase! Built quality and fit is above expectations!

Alex R.
United States United States

Great product, fast shipping!

High quality mount with easy installation and immediate performance gains! The vibration is noticeable with the other VF mounts installed, but that’s ok for a project/fun car.

Ian B.
United States United States