SCT X4 Power Flash 7015 Ford Programmer - 2017-2020 Ford Raptor 3.5L Ecoboost GTDI

  • $419.95
  • On Sale

X4 Ford Quick Overview
The X4 Power Flash arrives Pre-Loaded with DYNO Proven tune files that INCREASE HORSEPOWER and TORQUE! Programming your vehicle with one of SCT's pre-loaded tune files is as easy as 1-2-3. Simply plug the OBDII connector into your vehicle's OBDII port, select the pre-loaded tune file using the simple to navigate menu and within minutes the X4 programs your 2017-2020 Ford Raptor 3.5L Ecoboost GTDI. The X4 Power Flash arrives Pre-Loaded with DYNO Proven tune files that INCREASE HORSEPOWER and TORQUE! This product does not support any changes to your vehicle's emission system

X4 Ford Product Features

Increases Horsepower & Torque!
Increases your vehicles Horsepower, Torque, Throttle Response and even Fuel Mileage

Full Color Backlit LCD Display
Full Color LCD display for easy viewing, day or night.

Reads/Clears DTC Trouble Codes
Reads and clears diagnostic trouble codes quickly & easily, saving on expensive diagnostic fees.

Dual Analog Inputs
Monitor EGT temps, air-fuel ratio and other popular sensor data.

Installs Quickly & Easily
Installs in minutes via your vehicle's ODB-II port

User Adjustable Vehicle Parameters
Adjust for common performance bolt-ons such as Cold Air Kits, Exhaust Systems & Gears

Stores 10 Custom Tunes
Stores up to 10 custom tune files created by your local SCT Custom Tuning Dealer.

High Speed Datalogging / Monitoring
View & record your vehicles PCM data on the LCD screen or on your laptop.

Easy Restoration Back to Stock
The X4 Flash device backs up your factory PCM program during installation should you ever need to return your vehicle to the stock program. Restoring your vehicle to the stock PCM program is as easy as selecting "Return to Stock" from the device menu. With all SCT devices, once returned to stock, there is no footprint or trace of the tune in the vehicle's PCM.

USB Interface Cable Included
USB Interface Cable & Livelink Datalogging software included

*Only compatible with Windows Vista/7/8/10 OS (Does not operate on Mac OS)

Built-In Wifi for easy updates
Built-in Wifi allows you to easily attach to your local area wireless network to download device updates.

2017 EcoBoost:

94HP + 152TQ

2018 EcoBoost:

102HP + 99TQ

Pre-Loaded Tune File Adjustable Options

* Adjustable Options vary for each vehicle and are not available on all vehicles

Auto Start/Stop
Disable auto start/stop.

Axle Ratio
Correct the vehicle speedometer (and fuel efficiency calculations) if you have changed the gear ratio on your vehicle. If no gear ration modifications have been made to the vehicle, then choose the stock setting when the tuner prompts you to choose a gear ratio. This will ensure that no modifications are made to the stock program.

Global Spark
Allows addition or removal of timing across all RPM ranges

Idle Adjust
Enable and select a value for Engine Idle position. This is a great feature for keeping voltage in the vehicle up while running auxiliary electronics off of the vehicle’s power system.

Rev Limiter
Regulate the highest RPM that an engine can reach before the engine is electronically limited. Increasing the RPM limit is recommended only for racing purposes. One of the most important ways to protect your engine from damage is to keep the RPMs from going too high.

Speed Limiter
Change the top speed that the vehicle will reach before the engine automatically limits the power needed to go faster.

Tire Size
Correct the speedometer if you have changed your tire size from stock.

Change or disable the Tire Pressure Monitoring System.

Stores Stock Tune
Stores a true copy of your vehicle's stock file before programming. Used for warranty repairs and unlocking the programmer.

Supports Custom Tunes
Supports and holds up to 10 custom tunes

*This product is not legal for sale or use in California on pollution controlled motor vehicles