Exedy OE Quality Clutch Kit - Ford Focus Duratec 2.0L & 2.3L 2003-2011

SKU: FS107
  • $549.95
  • On Sale
  • 17 reviews

Exedy OE Quality Clutch Kit with Lightweight Solid Flywheel

The #1 selling clutch kit we offer and for good reason. The Exedy OE Quality clutch kit was designed with daily comfort, performance, longevity and reliability in mind. Clutch engagement and pedal feel is nearly identical to the original factory clutch kit but offers a little more feedback allowing for even more control and confidence in all driving conditions.

We recommend this clutch kit for vehicles ranging from completely stock to vehicles equipped with full bolt-ons such as intake, exhaust, headers, ecu tune, cams, etc. Through testing we have found it can handle more power & torque compared to the original factory clutch kit. Not recommended for turbo, supercharger or nitrous equipped vehicles.

Key benefits compared to the original factory clutch kit are reduced rotational weight in the form of a single mass light weight flywheel. The single mass flywheel weighing at 15lb, 12oz is the key component to better feel and more performance with the OE Quality clutch kit without compromising comfort and daily drivability.

  • Saves approximately 10lbs of rotational weight
  • Quicker and smoother shifts
  • Better throttle response
  • Improved accelleration
  • Handles upgraded power levels better than original factory clutch kit

Torque Specs:
Flywheel to crankshaft bolts require 83 ft-lbs
Pressure plate to flywheel bolts require 21 ft-lbs


Fitment and appearance between the Exedy & original OEM Dual Mass Flywheel, pressure plate and disc will differ vastly from each other. They are not the same assembled stack height, weight, etc but engineered from Exedy to be a full 100% replacement setup.


2.0L engines (require) new shorter flywheel bolts, 2.3L engines can reuse the factory flywheel bolts but new ones are recommended. SKU: 2S7Z6379AA

Sold out

NOTICE: Clutch slave cylinder throw out bearing must be replaced when installing a new clutch kit. SKU: FSLSC304

Sold out

NOTICE: Two quarts of Motorcraft transmission oil are recommended during a clutch replacement since the oil must be drained during transmission removal. SKU: XTM5QS

Sold Out

Ford Focus Duratec 2.3L 2003 2004
Ford Focus Duratec 2.0L 2005 2006 2007 2008 2009 2010 2011
Ford Focus ST Duratec 2.3L 2005 2006 2007

Customer Reviews
4.9 Based on 17 Reviews
5 ★
4 ★
3 ★
2 ★
1 ★
Customer Photos
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
FSWERKS Exedy OE Quality Clutch Kit -  Ford Focus Duratec 2.0L & 2.3L 2003-2011 ReviewFSWERKS Exedy OE Quality Clutch Kit -  Ford Focus Duratec 2.0L & 2.3L 2003-2011 Review

Exactly what I was looking for

I wanted a standard flywheel for my 2005 Ford Focus, which had a Dual Mass Flywheel. I also wanted it to be simple and pain free swap. FSWorks provided that for me.

Raymond B.
United States United States

Slave cylinder troubles

I have had this clutch kit going on a little over 2 years and the clutch slave cylinder just busted leaving me broke down. Thinking I was good to go for at 100,000 miles since I got 168,000 out of stock clutch I was kind of disappointed. But here we go again.

Cody M.
United States United States

Amazing kit feels great!

Fit perfect, went in easy, and drives great! Feels better than OEM, more grabby and the ligtened flywheel is, Mwah, perfect! Help the gain 5 HP Ford focus 2004 zx3 2.3L manual 5speed

Derek S.
United States United States

Feels great

I dont have a good before and after claim. My clutch and flywheel was fried when I bought the car. I knew I didnt want to go dual mass, so this was definitely the way to go. I don't know what a proper focus clutch feels like, but have driven plenty of performance vehicles. I drove with home from the shop with a smile cause excedy just does it so good. Feels great. Fswerks has been coming through with fast shipping too! Thanks guys!

Bryan W.
United States United States

Exactly what I was looking for

This vehicle uses a dual mass flywheel and they are problematic and expensive this was exactly what I was looking for to be budget friendly and work correctly

Jay M.
United States United States

High Quality Parts, Minus One Star Because alignment tool was incorrect

This kit comes with really nice parts, and everything fits great. I was happy to find a kit that included everything needed to convert to a solid flywheel. As I mentioned above the only reason I did not give 5 stars is because the clutch disc alignment tool was incorrect. The diameter was too small to fit snug in the crankshaft, I was able to make it work by wrapping it in electrical tape. The install took me two days, getting the transmission in and out was not easy. After the first drive I can notice the quicker revving from the lighter flywheel. The engagement is also much smoother and firmer. I was also surprised to find that the clutch pedal effort is much less with this kit than the stock clutch. Overall a great investment.

United States United States

Great clutch

Lightweight flywheel makes the car noticably quicker and the clutch feels great , perfect for bolt on upgrades . Im officially chirping second gear again good clutch for sure

joshua g.
United States United States

Excellent Clutch

I've had this in for almost a year, it's a great clutch! I was happy this replaces the dual mass flywheel. It might rev a tiny bit quicker than with the dual mass since it's lighter, but its hard to tell. I've got a mostly stock 2.0 Duratec and it holds up to whatever clutch dumps and even trailer towing that I throw at it. Quality clutch, I expect a long trouble free life from it.

Thomas S.
United States United States


would this kit fit on 2004 ford mondeo 2.0 duratec with mtx75 gearbox?

Netherlands Netherlands


Sorry we are not sure on this fitment. Thanks


2003 Ford Focus ZX3

Clutch install went well. Clutch feels great and has more feedback than stock definitely recommend!

Nathan C.
United States United States


Thanks for your input :-)


Volano e frizione Ford focus duratec

Tutto ok, come mi aspettavo, si riconoscono subito le aziende serie, e professionali!

Renzo P.
Italy Italy


Translated: Everything ok, as I expected, serious and professional companies are recognized immediately! Thank you :-)


Damn right

Ashamed to say I didn't install it myself ,and still breaking her in, but damn it feels good.

Byron B.
United States United States

Great swap from duel mass flywheel

Every thing went smooth got every thing they recommended, slave cylinder little different from factory, but works great, you really notice how much lighter it is. Transmission slapped back in like a champ, so thanks and good luck if you buy it ,the work was well worth it.

Matthew S.
United States United States

Awesome Service after the sell

I bought clutch kit slave cylinder replacement. The slave cylinder was different than mine working on Sunday. Left a message and had a response with in minutes. From the beginning of purchasing from Fswerks to working after the sell Awesome service. I will continue to do business with them.

Mat P.

Great Product and great service

This company is amazing!

Alexander H.
United States

Best one for the dollar

This is one of the best upgrades you can do to your vehicle.If you don't have the full amount,do yourself the favor and save.I called Fswerks,the we're out of stock,I explained the my situation of time,they made few calls,moved mountains,and I got delivered with 8days,rather than the 14days.Great knowledgeable people and superb customer service. Thanks FSWERKS,customer service at its best


Excellent OEM replacement, but make sure you understand the conversion

I installed this clutch kit about 6 months ago and it's been excellent. After installing it I took the car for a road trip from Illinois to the Colorado Rockies, and it performed excellently. I have a 2006 2.0L Duratec, and it comes OEM with a dual mass flywheel; this kit is designed to remove the dual mass flywheel and replaces it with a solid flywheel. This is something that both Exedy and FSwerks fails to explain in the description of the kit. So don't be alarmed when you take out your old pressure plate and flywheel and they look nothing like what you're about to bolt to your transmission, because this kit fits just fine. This clutch grips with a little more aggression than OEM, but I enjoy it much more than the old clutch.

Steven N.