VF-Engineering Drivers Side Engine Mount - Ford Focus SPI / Zetec / SVT / DuratecSKU: FS048
Billet / Polyurethane Engine/Trans Mounts
The Ford Focus factory engine mounts were designed as soft, flexible units, to provide a comfortable drive. The drawback was the relatively large amount of engine movement the OEM mounts allowed under torque load and on hard acceleration. Such engine movement decreases stability under high performance driving conditions and rapid gear selection.
To reduce this movement VF-Engineering engineered a complete fitted replacement with specially shaped molded, 70A durometer polyurethane inserts. The mount body is machined from billet aircraft grade aluminum, being almost twice as strong than the OE cast material. Installation should take no more than 20 minutes. This high performance mount provides a difference in the stability of the car when accelerating and braking hard. Gear changing under hard acceleration is also enhanced.
NOTE: For street use, we recommend using only the rear engine mount. Using all mounts together will cause some vibration (due to the nature of performance polyurethane mounts) that may not be desired for a daily driver, and is more for track use (Road racing, drag racing, autocross, etc).
Ford Focus SPI 2000 2001 2002 2003 2004
Ford Focus Zetec 2000 2001 2002 2003 2004
Ford Focus SVT 2002 2003 2004
Ford Focus Duratec 2.0L & 2.3L 2003 2004 2005 2006 2007 2008 2009 2010 2011
Fast and helpful as always
Get the trio!
Have all 3 VF Eng. mounts keeps the engine planted and minimal movement. Daily driven car and the vibrations are fine as long as you set them to where they aren’t in a bind also make sure you follow the instructions and use loctite. all in all I’m sad I didn’t get them sooner.
Its amazing how much different my Focus accelerated and cornered after installing thiis mount. I highly recommend it.
Pain to get on but
Pain to get on but glad I did it
I use this for my track car and it works great!!!