Exedy Stage 2 Clutch Kit - Ford Focus Duratec 2.0L & 2.3L 2003-2011

SKU: FS105
  • $809.99
  • On Sale

This item is due back in stock after

Exedy Stage 2 Clutch Kit with Lightweight Chromoly Solid Flywheel

The Exedy Stage 2 clutch kit was designed with performance and track & street use in mind while offering proper clamping force in forced induction applications. Clutch engagement is considered a little aggressive with some chatter on initial take off.

We recommend the Exedy stage 2 clutch kit for vehicles ranging from mild upgrades to vehicles equipped with forced induction. Through testing we have found it can handle at least (325 ft lbs of torque at the wheels) consistently. Recommended for turbo, supercharger or nitrous equipped vehicles as well as road racing and drag racing.

Key benefits compared to the original factory clutch kit are reduced rotational weight in the form of a single mass light weight chromoly flywheel. The single mass flywheel weighing at 12.5lb is the key component to better feel and more performance. Exedy also developed a high performance heavy duty pressure plate and clutch disc to handle the abuse.

  • Saves approximately 12lbs of rotational weight
  • Quicker and smoother shifts
  • Better throttle response
  • Improved acceleration

Notes:

  • There is a required 500 mile break-in period with the Exedy Stage 2 clutch kit.
  • Pedal pressure increases approximately 75% over the original factory clutch kit.
  • In some cases the clutch may engage in a higher or lower pedal position than stock. It's crucial to clutch life and effective torque holding capabilities that excessive clutch slippage is avoided.

NOTICE:

Fitment and appearance between the Exedy & original OEM Dual Mass Flywheel, pressure plate and disc will differ vastly from each other. They are not the same assembled stack height, weight, etc but engineered from Exedy to be a full 100% replacement setup.

NOTICE: 2.0L engines (require) new shorter flywheel bolts, 2.3L engines can reuse the factory flywheel bolts but new ones are recommended. SKU: 2S7Z6379AA

Sold out

NOTICE: Clutch slave cylinder throw out bearing must be replaced when installing a new clutch kit. SKU: FSLSC304

Sold out

NOTICE: Two quarts of Motorcraft transmission oil are recommended during a clutch replacement since the oil must be drained during transmission removal. SKU: XTM5QS

Sold out

Fitment:
Ford Focus Duratec 2.3L 2003 2004
Ford Focus Duratec 2.0L 2005 2006 2007 2008 2009 2010 2011
Ford Focus ST Duratec 2.3L 2005 2006 2007