FSWERKS Lower Rear Engine Mount - Ford Focus Duratec 2.0L 2008-2011

SKU: FS044N
  • $129.95
  • 7 reviews

This item is due back in stock after month_day_year

The Ford Focus factory engine mounts were designed as soft, flexible units, to provide a comfortable drive. The drawback was the relatively large amount of engine movement the OEM mounts allowed under torque load and on hard acceleration. Such engine movement decreases stability under high performance driving conditions and rapid gear selection.

To reduce this movement FSWERKS engineered a complete fitted replacement with specially shaped molded, 70A durometer polyurethane inserts. The mount body is machined from billet aircraft grade aluminum, being almost twice as strong than the OE cast material. Installation should take no more than 15 minutes. This high performance mount provides a difference in the stability of the car when accelerating and braking hard. Gear changing under hard acceleration is also enhanced.

Replacement polyurethane and metal inserts are also offered.

NOTE: For street use, we recommend using only the rear engine mount. Using all mounts together will cause some vibration (due to the nature of performance polyurethane mounts) that may not be desired for a daily driver, and is more for track use (Road racing, drag racing, autocross, etc).

Torque Specifications: (44ft lbs) two bolts

Fitment:
Ford Focus Duratec 2.0L 2008 2009 2010 2011 (Sedan and coupe both automatic and manual transmission cars)


Customer Reviews
5.0 Based on 7 Reviews
5 ‚ėÖ
100% 
7
4 ‚ėÖ
0% 
0
3 ‚ėÖ
0% 
0
2 ‚ėÖ
0% 
0
1 ‚ėÖ
0% 
0
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
10/24/2023

Lower Engine Mount

If you are going to increase the horsepower, then it is a good idea to improve the engine mounts. This is a very well-made part and I suggest it to anyone. The shipping was also very good.

EW
ERNEST W.
United States United States
08/28/2023

Difficult but excellent !

Very tight fit and had to remove the engine mount for clearance.....but a excellent transmission mount !

DP
DONALD P.
United States United States
07/05/2023

No Vibration

Replaced another company's poly mount and almost all of the vibration has gone I now have all 3 FSWerks poly mounts and could not be happier.

VP
victor p.
United States United States
03/06/2023

Lower Rear Engine Mount

The part is awesome! It makes my car run much more smoothly than before.

CW
Cody W.
United States United States
10/18/2022

2008 focus SES auto

Experience all together positive. Took advantage of a ‚Äúblemished‚ÄĚdogbone on sale. After repeatedly watching various you tube how to‚Äôs I was ready. Pre lubed all contact points. Used ramps‚Ķ jack with wooden spacer. Bone bolts first‚Ķ mounting hinge second. Cleaned area and lightly lubed it. Holes eventually lined up‚Ķ.jiggled the engine/trans area till final holes lined up. Don‚Äôt forget: the bushing surface with the beveled edge faces down. Torqued to safe specs: 38/40 ft. Pounds. Little more squeaks than before but for an auto‚Ķ. It‚Äôs okay. With the new FSWERKS sway bars and CAI it‚Äôs more responsive. Worth the $ and time. Good luck!

R
Randy
United States United States
09/27/2022

Excellent Mount

My 09 Focus is mostly a daily driver and commuter, but having upgraded the exhaust, intake, and the clutch from FSWERKS, this mount really ties everything together. The old stock mount was difficult to get out without removing the entire bracket (lots of prying because I didn't have lots of different angled wrenches to get at one of the bolts that's hard to reach), but this mount slips right in place with no issue and is excellent. Holds the motor tight to the frame when accelerating, helps with clutch feel as well because the mount isn't eating up all the engine rotation. Makes me feel just that much more connected to the car when i'm driving, and i really like that.

MS
Mikael S.
United States United States
09/27/2022

Excellent Mount

My 09 Focus is mostly a daily driver and commuter, but having upgraded the exhaust, intake, and the clutch from FSWERKS, this mount really ties everything together. The old stock mount was difficult to get out without removing the entire bracket (lots of prying because I didn't have lots of different angled wrenches to get at one of the bolts that's hard to reach), but this mount slips right in place with no issue and is excellent. Holds the motor tight to the frame when accelerating, helps with clutch feel as well because the mount isn't eating up all the engine rotation. Makes me feel just that much more connected to the car when i'm driving, and i really like that.

MS
Mikael S.
United States United States