FSWERKS Green Filter Cool-Flo Air Intake System - Ford Focus Duratec TiVCT 2.0L 2012-2018
SKU: FS017GBThe Cool-Flo is the perfect choice for enthusiasts who want to add power, looks, and even some growl under the hood. This unit comes with our heat shield to reduce the surrounding air intake temperatures. By reducing intake temperatures we are able to take advantage of the cooler more dense air resulting in improved throttle response, better combustion, and more power.
Included with the kit is the Green air filter, installation hardware and installation instructions for a simple bolt on fit. Factory mounting points are utilized for installation without the need for permanent modification or fabrication.
Heat Shield
β’Β Aluminum constructionΒ
β’ Two stage powder coated finish
Green Air Filter
β’ Extra pleats used for maximum surface area
β’ Super strength to withstand engine intake pressure
β’ Comes pre-oiled with Green Filter Oil
β’ Stainless Steel Clamps
β’ Limited lifetime guarantee
Note:
This product is not CARB Exempt andΒ is not legal for use on public roads in California or other states adopting California emission standards.
Optional accessories you may be interested in:
Green Filter Cleaner/Oil Kit
Fitment:
Ford Focus 2.0L Duratec TiVCT 2012 2013 2014 2015 2016 2017 2018
(including S, SE, SEL and Titanium models)
Best intake out there
So far itβs been doing itβs job, gained couple hp and feels better than stock
Fantastic Intake!
Highly recommended! Installation instructions were great and easy to follow. It adds an awesome little growl, and you can feel a little something extra when you get on it. It looks sweet too.
FSWERKS
Thanks for your feedback Jack and pictures :-)
Great little boost
The little boost in pick up and the added growl are definitely worth it.
great product
really loving my new cold air intake. installation was pretty straightforward and could notice a difference in tone and snappiness right away. definitely recommending to friends
The power adder
The package was packed good an the instructions were very clear only thing I wish was they provided a small one time use of lock tight but over all very good an as far as performance an gas miles who knows lol if u stomp on the gas you can hear the intake roar an the eagles soar will be getting the exhaust from here as well
Connor
Very easy installation, took maybe 20 or 30 minutes at most. Noticed better acceleration, and is also louder than stock intake even if you took the box cover off the stock intake
FSWERKS Green Filter Cool-Flo Air Intake System - Ford Focus Duratec TiVCT 2.0L 2012-2018
Nothing bad to say about this product. Easy install. Great install directions packet. Quick shipping. Looking forward to ordering more.
A nice intake.. Specially for the price
So far, ive been running the FSWERKS Green Filter for about 3 weeks. Ill just make the ol pro/con list to simplify this Pros: -Great sounds -A little more power -Looks good -Easy Install, less than 15 mins (directions were ok, but its really not that hard to install) -One can great better MPG; on the highway i can get 40+ (if you dont slam the gas medal down) -The Metal Heat Shield plate is sturdy with a good coat of paint on it -Makes my car idle smoother -Came with a tracking number, my mountune parts havent Cons: -Wasnt to happy about how the filter mounts on the intake (there could of been a small spacer that goes from the intake to the filter through the heat shield for better mounting; because of the thickness of the heat shield plate the filter doesnt mount all the way on the intake{i check it all the time to make sure its on and secure}) -Can seriously reduce MPG (down to 30.4{as of right now], it hates traffic, lights and stop signs) -A small con, i called to ask it they could package two items together (which they couldnt, no biggie), was not called back but emailed (not that big of a deal but i would of preferred a call) I am enjoying the intake, and i would recommend it to others. 4 out of 5 stars
Great ..but
It's great but have had trouble with it slipping off on multiple occasions and causing a cel
FSWERKS
Hi Bailey, This maybe happening if the filter hose clamp is too tight which squeezes the plastic MAF housing. As mentioned in the installation instructions; Use caution not to over tighten the hose clamp to the MAF housing since it's made from thin plastic. Thank you
Love it
This was my first mod to my car and I absolutely love it
It sucks, just like itβs supposed to!
Easy install, looks great, sounds great, canβt complain
Easy install very precise instructions.
I installed it alongside a magnaflow slip on and the exhaust note is definitely more refined sounding and the car just feels more alive than it did before. Better throttle response and what feels like a slight performance boost as well. And when you rev you'll be able to hear the intake hiss as well. Great product and look forward to eventually getting the fswerks race exhaust as well at some point.
Satisfied, would recommend
Satisfied, would recommend.
Great preforming intake!
The overall look of the intake is fantastic with the heat shield. The performance is definitely noticeable with improved throttle response and a throaty induction sound. Install was fun and relatively straightforward (did it with my little brother in about an hour or so) with all the instructions and hardware with the intake. Once i got a tune the intake sounded so much more aggressive and felt like the air going in the engine was truly making a difference. Great buy regardless if you plan to tune the car or keep it stock!
Great intro to modding and working on your car
I never was a car guy, like I didnβt know much. But this install was really simple. The instructions were clear and I finished it all with a few sockets. The result is great. Sounds good, feels more responsive on acceleration, and it looks cool as heck. Definitely buy this if youβre thinking about doing some of your own modifications
Easy Installation
just received this product 2 weeks ago and had a half hour to spare, so I installed the air intake system and it was so easy. Now I am looking at installing the exhaust system from FSwerks as well.... Should be a Great Combo... Thanks again, Jeff
Great all around loving it
Great all around loving it
2014 Ford Focus Manuel. Awesome Intake!!!
The CAI was easy to install and it sounds great! The engine sounds a lot meaner and has a deep growl to it. You can also hear some cool induction noises. The car seems to pull slightly faster through the revs. Approx. 7.0-7.3 0-60 time. I so glad FSWERKS offers an affordable intake. There is no reason to make an intake $350+.
Worth the money if you enjoy driving
This thing for the sound alone is worth it. Notable sucking sound from 2k to 4K, low rpms have a slight grumble as well with anything over 4K you can really hear the motor growl, I had one of these for my 09 focus and now just bought one for my 2018 focus titanium and couldnβt be more pleased.