BLEMISHED VF-Engineering Drivers Side Engine Mount - Ford Focus SPI / Zetec / SVT / DuratecSKU: FS048-BLEM
THIS IS A CUSTOMER MOUNTED/RETURNED ITEM WITH SLIGHT MARKS FROM MOUNTING BOLTS. (NOT SHOWN IN PHOTOS)
Billet / Polyurethane Engine/Trans Mounts
The Ford Focus factory engine mounts were designed as soft, flexible units, to provide a comfortable drive. The drawback was the relatively large amount of engine movement the OEM mounts allowed under torque load and on hard acceleration. Such engine movement decreases stability under high performance driving conditions and rapid gear selection.
To reduce this movement VF-Engineering engineered a complete fitted replacement with specially shaped molded, 70A durometer polyurethane inserts. The mount body is machined from billet aircraft grade aluminum, being almost twice as strong than the OE cast material. Installation should take no more than 20 minutes. This high performance mount provides a difference in the stability of the car when accelerating and braking hard. Gear changing under hard acceleration is also enhanced.
NOTE: For street use, we recommend using only the rear engine mount. Using all mounts together will cause some vibration (due to the nature of performance polyurethane mounts) that may not be desired for a daily driver, and is more for track use (Road racing, drag racing, autocross, etc).
Ford Focus SPI 2000 2001 2002 2003 2004
Ford Focus Zetec 2000 2001 2002 2003 2004
Ford Focus SVT 2002 2003 2004
Ford Focus Duratec 2.0L & 2.3L 2003 2004 2005 2006 2007 2008 2009 2010 2011
This Product does exactly waht I was looking for. To firmly plant my engine down and to eliminate some of the engine torquing that goes on when driving. Minimal vibration increase.
Excellent service and fast delivery. The mounts themselves are great, I have all three mounts and the car vibrates more than with just the rear mount and a lot more than stock. I haven’t had the chance to take it on a long road trip yet but I wouldn’t doubt if it makes your butt numb after a while. Commuting to work, short trips, and some autocross duty have proven these mounts are worth all the vibration. Having the fswerks turbo kit my wheels want to spin and jump a lot and putting all three mounts on drastically decreased the wheel hop and increased my traction and feel. I have way more confidence in my focus off the line and everywhere else now bc of these mounts.
Fast and helpful as always
Have all 3 VF Eng. mounts keeps the engine planted and minimal movement. Daily driven car and the vibrations are fine as long as you set them to where they aren’t in a bind also make sure you follow the instructions and use loctite. all in all I’m sad I didn’t get them sooner.
Its amazing how much different my Focus accelerated and cornered after installing thiis mount. I highly recommend it.