FSWERKS ITG Cool-Flo Race Air Intake System - Ford Focus Duratec 2.3L/2.0L 2003-2011

SKU: FS016B

by: FSWERKS

  • $199.95
  • 45 reviews

Low Inventory

The FSWERKS Cool-Flo Race air intake system fits all 2.0L and 2.3L Duratec engines from 2003 - 2011. This is a true cold air intake system that situates the air filter in the lower front region of the car, away from ALL engine heat. The Cool-Flo Race air intake system utilizes an easy to install one piece design that uses 3" mandrel bent steel tubing along with a laser cut MAF sensor housing and brackets. Other features include tig-welded construction and coated with wrinkle black powder coat.

Intake Tube

• Mandrel bent steel construction 
• Wrinkle black powder coat
• Tig-welded

Connecting Hoses 
• High temperature resistant 
• Three ply silicone construction 
• Oil resistant
• Stainless steel hose clamps

ITG Air Filter
• Three layer reticulated polyester foam element 
• Optimal filtration of particles as small as 10 microns
• Pre-oiled with ITG dust retention coating
Limited lifetime warranty to the original purchaser

Note:
Our intake systems are not CARB Exempt. 

Fitment:
Ford Focus Duratec 2.3L 2003 2004
Ford Focus ST Duratec 2.3L 2005 2006 2007
Ford Focus Duratec 2.0L 2005 2006 2007 
Ford Focus Duratec 2.0L 2008 2009 2010 2011

Other SKU's: FS016, FS016B, FS016G, FS016GB


Customer Reviews
4.8 Based on 45 Reviews
5 ?
89% 
40
4 ?
9% 
4
3 ?
0% 
0
2 ?
2% 
1
1 ?
0% 
0
Customer Photos
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
FSWERKS FSWERKS ITG Cool-Flo Race Air Intake System - Ford Focus Duratec 2.3L/2.0L 2003-2011 ReviewFSWERKS FSWERKS ITG Cool-Flo Race Air Intake System - Ford Focus Duratec 2.3L/2.0L 2003-2011 Review
03/02/2021
Air intake system

I’m really enjoying my new air intake system!! Price was good, shipping was excellent and the installation was easy!! I would recommend this to anyone and everyone!! Thank you FSWERKS!!!

JR
John R.
United States United States
03/09/2021
FSWERKS

Thanks for your feedback John :-)

FSWERKS FSWERKS ITG Cool-Flo Race Air Intake System - Ford Focus Duratec 2.3L/2.0L 2003-2011 Review
10/19/2020
Perfect fit and I have a fun whistle!

Love it. Fit perfectly and it sounds a little like a turbo. My gas pedal is noticeably more responsive.

CP
Christopher P.
United States United States
FSWERKS FSWERKS ITG Cool-Flo Race Air Intake System - Ford Focus Duratec 2.3L/2.0L 2003-2011 ReviewFSWERKS FSWERKS ITG Cool-Flo Race Air Intake System - Ford Focus Duratec 2.3L/2.0L 2003-2011 Review
04/23/2020
Great product

I was looking for a quality product to replace the factory lifetime air filter system.This product is high quality and fit like a glove. I decided to add the protective pre filter cover after. Car is definately more responsive. I would definately recommend it

IK
Imi K.
United States United States
FSWERKS FSWERKS ITG Cool-Flo Race Air Intake System - Ford Focus Duratec 2.3L/2.0L 2003-2011 Review
01/31/2020
Easy install! Looks great under the hood!

Everything went great! Got everything installed in an hour or so. Hardest part was getting old intake out.

JC
Josh C.
United States United States
FSWERKS FSWERKS ITG Cool-Flo Race Air Intake System - Ford Focus Duratec 2.3L/2.0L 2003-2011 Review
11/18/2019
Best Intake Ever!!

Do yourself a favor and don't settle for the "short ram intake" that everyone does. I made my own intake before this one and I seriously regret not getting the fswerks one sooner. This intake delivers so much more power.

MB
Mitchell B.
United States United States
FSWERKS FSWERKS ITG Cool-Flo Race Air Intake System - Ford Focus Duratec 2.3L/2.0L 2003-2011 ReviewFSWERKS FSWERKS ITG Cool-Flo Race Air Intake System - Ford Focus Duratec 2.3L/2.0L 2003-2011 Review
10/23/2019
Completely different car

Pretty easy to install also gives the car a great sound paired with the race catback hoping to get a tune on it soon! pulls harder, gets pretty good mileage too

R
Rj
United States United States
FSWERKS FSWERKS ITG Cool-Flo Race Air Intake System - Ford Focus Duratec 2.3L/2.0L 2003-2011 Review
09/06/2019
FS Werks intake

Simple to put in ( wife’s 08 Focus ) works great and the car runs better and has more kick in it. Better then the K&N intake I had on it. I’d recommend it

TK
Travis K.
United States United States
FSWERKS FSWERKS ITG Cool-Flo Race Air Intake System - Ford Focus Duratec 2.3L/2.0L 2003-2011 Review
03/26/2019
Gotta Love FSWERKS

Combined with their race exhaust kit, the FSWERKS CAI has turned a mild compact sedan into a disturbingly loud (to others, I love it though) monster that apparently attracts cops more than a Subaru STI backfiring down the road (I started my car one day and a cop immediately whipped a U turn and tailed me home from work). This company is the reason why I don't think I'm ever gonna sell my Focus, since my lack of horsepower is masked by the wall of sound out my tailpipe.

CS
Christopher S.
United States
FSWERKS FSWERKS ITG Cool-Flo Race Air Intake System - Ford Focus Duratec 2.3L/2.0L 2003-2011 ReviewFSWERKS FSWERKS ITG Cool-Flo Race Air Intake System - Ford Focus Duratec 2.3L/2.0L 2003-2011 Review
02/28/2018
Great intake!

I got this intake because I was very unhappy with steeda' s "CAI" and it was very similar to the intake I had on my original 05 focus back in 05. There is a noticeable increase in power over stock and the steeda intake. Also the car sounds better on the intake end!

PD
Pasquale d.
United States
08/23/2021
My Focus Runs Better!!!

My 03 Focus was not running to its full potential I thought. So I did some research and Fswerks Cool-flo system looked like it worked the best. It does better performance and gas mileage I would highly recommend it.

RF
Russell F.
United States United States
07/22/2021
CH
CODY H.
United States United States
06/08/2021
Absolutely great

Easy to order, shipment on time, love the intake. Install was not quite as easy as suggested as I needed to pull the maf sensor off of its mounts to reach. Also I would suggest including a link to a video to reset the ecm. This is an important process when changing things on the motor. Other than that, everything was great.

P
Phillip
United States United States
04/05/2021
Not bad but...

Honestly any CAI will do, I got this one because it removes all the heat from the engine. it sounds great and my car is a little bit more powerful. cons are it doesn't fit 100% like its supposed, you have to stretch out the MAF sensor ( wish they put it at better spot) and regularly inspecting the air filter may be pain (other CAI have the filter at the top) anyways ill keep looking at fswerks since they are one of the few people who actually make anything for the duratec 2.0, cant wait to see how their other products handle.

JA
Jonathan A.
United States United States
04/02/2021
Great looks and performs even better

Removing the old intake was a bit easier than putting on the new one. Had trouble with the little circle plastic cover to cover one end . They made it a little smaller so it gets the good snug fit just gotta kind of force it on by twisting it on there . But gives great air flow and I just bought the cover for it so it doesn’t get damaged or damage engine from Sucking things in

JE
Jeourdin E.
United States United States
03/19/2021
DA
Daniel A.
United States United States
01/22/2021
Killer Intake!

This intake is expertly crafted. Install is a breeze and it truly gives the gains it promises to the engine. Highly recommend this intake kit! You won’t regret it.

WG
William G.
United States United States
01/24/2021
FSWERKS

Thanks for your feedback William :-)

12/27/2020
EZ
Eddie Z.
United States United States
12/28/2020
FSWERKS

Hi Eddie, you may have a vacuum leak or the MAF sensor is not connected properly. Please call us for assistance on this and have the check engine light code available if you have it. Thank you

05/11/2020
So far it has been

So far it has been pretty amazing! It definitely gives you way more power in the low RPM, seems like the car should have felt this way the whole time! One this is it leaks air quite frequenlty, it needs a small clamp for the top sensor connection on the intake as you just shove the censor inside the tube with nothing to tighten it down. Not a huge issue, would definitely reccomend! 2005 Ford Focus zx4 ST

AT
Andrew T.
United States United States
04/23/2020
Easy to Install, Significant Low-End Responsiveness Improvement

Removing the old intake (2004 Focus Sedan 2.3L) was a matter of unbolting the various airboxes, tubes, covers, and snorkels. PZEV systems get crazy really fast. It took maybe thirty minutes. Installing this system is as easy as slipping the short silicone sections over the ends, securing them with band clamps, then sticking it on the throttle body and clamping it down. There is 1 bolt to be fastened, and a little mount is included as the new system is a slightly different shape at that location. Little tip: when you have the MAF sensor out of the old system, give it a spray of some MAF cleaner as preventative maintenance. The engine became considerably more growly with this system, throttle response piped up significantly, and you can hear a faint whoosh when you stomp the pedal. Torque below 2k RPM has also improved significantly, though some of that may be due to the "lifetime" filter never having been replaced in 207k miles. Worth all the money and then some. Get the "pre-filter" cover for it too, it'll make filter cleanings easier and less frequent and it's pretty cheap.

SR
Steven R.
United States United States
04/21/2020
Shipping

Beware of the exchange rate plus the duty fees at the boarder if your shipping to Canada..was nailed with another 136 CAD before they let my package go today..so hopefully il get my stuff finally in 2 days..cuz I way over spent hope its worth it..will never get half my money back..no warning to knew buyers like me so writing this

T
Taylor
Canada Canada
04/24/2020
FSWERKS

Sorry Taylor. Unfortunately the customs fees from US to Canada can be costly on some products and we don't know the exact fees to post them. It doesn't help the Canadian dollar is also very weak now compared to our dollar which increases the product cost :-( Thank you

#FSWERKS - TAG US ON INSTAGRAM AND GET SHOWN HERE!